Bonjour,je suis intéressé pour faire le portage.Je ne suis pas un crack en .net, mais je pense que je pourrai compter sur l'aide de quelques experts pour arriver à un résultat.cette fonctionnalité est vraiment un manque criant.gérald
Burchardt [33] studied the fatigue performance of a sandwich structure with inserts via a fatigue test and simulation, and the results showed that the stiffness of the insert material had no influence on fatigue crack propagation. Demelio et al. [34] investigated the fatigue behavior of a honeycomb structure that was subjected to bending, compression, and shear loads by static and fatigue tests and found that the final failure was due to the compression of the surface layer in the loading area under the action of static load and that the failure was caused by the debonding of the surface layer and the core under the action of the fatigue load. Bozhevolnaya and Lyckegaard [28] proposed a new core insert structure design, whose design parameters were studied with the help of a finite element model. The result showed that the design could greatly reduce the level of damage to the local effect in the face. Cao and Grenestedt [35] evaluated two types of joints under bending and shear loads, and the test results showed that the two types of joints had excellent strength that was close to the strength of the composite sandwich reference sample. Toftegaard and Lystrup [36] developed a finite element parameter method to select a stronger T-joint, and the results, which were verified by simulation and tests, showed that the proposed method could improve the strength and decrease the weight of the T-joint.
crack autocad 2014 64 41
2ff7e9595c
Comments